MTL is suitable for PEBAX, NYLON, PU conduit moulding and welding, balloon and connector positioning welding, with axial tearing and non-stick characteristics, easy to tear off after heat shrinkage, can also be peeled off after cooling, can quickly complete the conduit moulding, effectively reduce costs, is the best choice to replace the tearable FEP market.
Certifications / Regulations
ISO 10993, RoHS
Operating Temperature Range
- Continuous use temperature: -40˚C~110˚C
- Minimum Shrinkage Temperature: 70˚C
- Complete shrinkage temperature: 110˚C or more
- Suggested Shrinkage Temperature: 130˚C ~ 220˚C (Shrinkage time depends on the equipment and application).
characterisation
- Shrinkage rate: 3:1
- Good physical and chemical properties
- Good transparency
- Suitable for gamma ray (γ) and ethylene oxide (ETO) sterilisation
- Double Layer Plastic Bag, Plastic Tray Packaging
- ISO 10993 and RoHS certified.
Technical Performance
| characterisation | Standard | Test Method | typical value |
|---|---|---|---|
| Length change rate | -10%~10% | ASTM D2671 | Through |
| Tensile Strength | ≥10.3MPa | ASTM D2671 | ≥14MPa |
| Elongation at break | ≥200% | ASTM D2671 | ≥270% |
| Elongation at break after ageing | ≥100% | ASTM D2671 (250˚C/168 hours) |
≥100% |
| Insulation Voltage | AC3000V/60S no hit |
ASTM D2671 | no hit |
| Dielectric strength | ≥19.7kV/mm | ASTM D2671 | ≥19.7kV/mm |
| Excellent electrical insulation properties | |||
| No heavy metal | |||
| Suitable for gamma ray (γ) and ethylene oxide (ETO) sterilisation | |||
Product Specification
| Product Model | sizes (mm) |
Before Shrinkage (mm) |
After Shrinkage (mm) |
Standard Length (metres) |
|
|---|---|---|---|---|---|
| Inner Diameter (minimum)) |
Inner Diameter (maximum) |
wall thickness | |||
| MTL-0008 | 0.8 | 0.81 | 0.28 | 0.25±0.05 | 200 |
| MTL-0014 | 1.4 | 1.35 | 0.45 | 0.31±0.05 | 200 |
| MTL-0016 | 1.6 | 1.60 | 0.53 | 0.41±0.05 | 200 |
| MTL-0020 | 2.0 | 1.98 | 0.64 | 0.41±0.05 | 200 |
| MTL-0024 | 2.4 | 2.40 | 0.79 | 0.51±0.08 | 200 |
| MTL-0028 | 2.8 | 2.79 | 0.90 | 0.51±0.08 | 200 |
| MTL-0032 | 3.2 | 3.18 | 1.07 | 0.51±0.08 | 200 |
| MTL-0048 | 4.8 | 4.78 | 1.60 | 0.51±0.08 | 100 |
| MTL-0064 | 6.4 | 6.35 | 2.11 | 0.64±0.08 | Hakka (branch) |
| MTL-0095 | 9.5 | 9.53 | 3.18 | 0.64±0.08 | Hakka (branch) |
